It is a known fact that water is the main component of concrete. Therefore, it should not be an issue if you pour concrete in the rain. The truth is that it is more of a problem than you may think. The reason for this is that rain can compromise the final finish and strength of the concrete.

However, wet weather is often just inevitable. That is why we’re here to help. Today, we are going to share with you some tips on how to lay concrete in the rain if you don’t want to hire a concrete contractor renovation Burnaby.

Wipe Down Excess Water

You are probably too slow with getting out the plastic sheet for protection. Well, don’t worry. All you’ve got to do is erect the cover when you can and wait for the rain to stop. After that, push the excess water off the concrete’s surface using something thin such as a hosepipe or broom handle.

Do Not Spread Dry Concrete

You should not lay dry concrete on top if rain has caused a ponding or a wet surface to occur. A couple of individuals might believe that working the rainwater into the concrete or adding excess concrete might act to soak the water up. However, this is not the case and it can lead to problems.

It Varies on the Stage

The best way to protect a freshly laid concrete is to use a plastic sheet. This is particularly true if rain sets in. The rain will have less effect if the concrete is a bit further along the curing process.

Prepare a Plastic Sheet on Hand

It is wise to have a tarp or plastic sheet prepared, regardless of whether or not rain is predicted. It should be on standby and ready to roll out if rain does occur. Keep in mind that you have to seal off the edges properly to stop water from leaking inside.

Scout Out Cavities, Downspouts, and Gutters

Water might gush out of the downspouts when it heavily rains and might go into the wet concrete. This can lead to damage. Before you start the project, you’ve got to pinpoint exactly where these things are. This will enable you to get ready early on. In addition to that, you’ve got to examine for cavities where rainwater can accumulate. You’ve got to ensure you cover them to avoid pooling.

Examine the Weather Forecast

This might appear like a very obvious tip. However, if you have the prudence of checking the local weather prediction, it can offer you the flexibility to adjust the day or time of the concrete pour. Obviously, the weather forecast isn’t always accurate. However, it can still help when it comes to getting a sense of whether rain is on the way.

Since the weather is extremely unpredictable, you cannot always ensure dry conditions. You’ve got to expect the unexpected. If you follow the tips mentioned above, you can easily prevent any damages or issues from happening with your freshly laid concrete.